manualshive.com logo in svg

Yamaha PortaTone PSR-4000, Owner'S Manual

Share
Download
Yamaha PortaTone PSR-4000 Owner'S Manual Download Page 98

94

The 

LISTEN

 LCD button which appears when

the 

SONG LIST

 is selected can be used to listen to

the currently selected song — press 

LISTEN

 again

to stop playback when done.

When the user or song file to be renamed has

been selected, press the 

EXECUTE

 LCD button.

The following display will appear.

Disk Operations

Song file names can be up to 12 characters long

and user file names can be up to 8 characters long.
Use the 

< >

 LCD [

▲

/

▼

] control to move the name

cursor to the various character positions, then use
the 

A~Z

 or 

0~9…

 LCD [

▲

/

▼

] control to select the

required character for each position. The 

A~Z

 LCD

[

▲

/

▼

] control selects capital letters and the 

0~9…

LCD  [

▲

/

▼

] control selects numbers and special

characters. When a song file is selected the “

a~z

”

LCD [

▲

/

▼

] control is also available for lower-case

character entry.

When the file and file name have been specified,

press the 

YES

 LCD button to actually begin the

rename operation (or press the 

NO

 LCD button to

cancel the operation). “Don’t remove disk” will
appear while the file is being renamed.

NOTES

• User file names which already exist cannot be entered.

Summary of Contents for PortaTone PSR-4000






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands