manualshive.com logo in svg

Yamaha PortaTone PSR-4000, Owner'S Manual

Share
Download
Yamaha PortaTone PSR-4000 Owner'S Manual Download Page 111

107

F3: Controller

●

INITIAL TOUCH

Sets the touch response OFF level and sensitivity

curve of the keyboard initial touch response, and
determines to which of the PSR-4000 voices touch
response will apply.

Use the 

OFF LEVEL

 LCD [

▲

/

▼

] control to set

the level at which touch response is turned off.

Use the 

SENSITIVITY

 LCD [

▲

/

▼

] controls to

select the desired sensitivity curve.

HARD 2

Requires the keys to be played very hard to produce maximum loudness.

HARD 1

Requires the keys to be played quite hard to produce maximum loudness.

NORMAL

Produces a fairly “standard” keyboard response.

SOFT 1

Not a sensitivity as the “SOFT 2” setting, but maximum loudness can still be easily produced with rela-
tively light key pressure.

SOFT 2

Allows maximum loudness to be produced with very light key pressure.

Use the 

LEFT

, 

R1

, 

R2

, and 

LEAD

 LCD [

▲

/

▼

]controls to turn initial touch response control for

the corresponding parts 

ON

 or 

OFF

 as required.

Summary of Contents for PortaTone PSR-4000






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands