manualshive.com logo in svg

Yamaha PortaTone PSR-4000, Owner'S Manual

Share
Download
Yamaha PortaTone PSR-4000 Owner'S Manual Download Page 116

112

■

CHORUS DEPTH

..........................................................................................................................................................................

F5: Reverb/Chorus/DSP Effect

Independently sets the depth of the chorus effect

for the multi pads, accompaniment, left voice, right
1 voice, right 2 voice, and lead voice

Use the 

M.PAD

, 

ACMP

, 

LEFT

, 

R1

, 

R2

, and

LEAD

 LCD [

▲

/

▼

] controls to set the depth of the

chorus effect as required for the corresponding parts.
The depth range is from “0” (no chorus effect) to
“100” (maximum chorus depth).

NOTES

• In addition to the graphic depth controls directly above the

LCD [

▲

/

▼

] controls, the chorus depth for each part  is

represented by a vertical bar to the right of the CHORUS
DEPTH parameter in the upper section of the display. The
longer the bar, the greater the chorus depth.

• When a new style is selected, the preset chorus type and

depth value for that style is automatically recalled.

• Each part and voice has a preset depth value and range

over which the depth can be varied. Depth variations may
therefore not have the same audible effect with all voices.

■

DSP EFFECT TYPE & DEPTH

........................................................................................................................................

●

DSP EFFECT TYPE

Selects the effect to be applied when the [DSP

EFFECT] button is turned on (page 34).

If the 

DSP  EFECT  TYPE

 parameters are not

showing on the lower section of the display, press
the 

TYPE

 LCD button. Use the LCD [

▲

/

▼

] controls

to select the desired type. The name of the current
DSP effect type is shown to the right of the DSP
EFFECT parameter in the upper section of the
display. See “THE DSP EFFECTS AND PARAM-
ETERS”, below for a list of the effects and their
parameters.

Summary of Contents for PortaTone PSR-4000






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands