background image

5

 

En

The following is the recommended procedure for installing the speakers in a 
ceiling. Please read it carefully before installation.
• Before you begin installation, read this owner's manual completely and consult 

your local building codes. If you have any doubt, contact your dealer or a 
qualified audio/video installer.

• Before installing the speakers, run the speaker cables to the installation 

location.

CAUTION

• When installing the speakers, do not touch the center of the drive unit with your 

hands or expose them to excessive physical shock. If they are dented, the 
sound will be distorted.

• Be aware of any concealed studs, electrical wiring or plumbing in the ceiling into 

which you are installing the speaker. If you are not sure of a safe way to install 
this speaker, consult a professional installer or a building contractor.

• When installing your N

S

-IC400 in-ceiling speakers, be aware of the product 

weight (

S

ee specification page) and the sturdiness of the material into which 

you are installing the speakers.

• Placing the speakers too close to a CRT-type TV may impair the picture color or 

cause a buzzing noise. In this case, move the speakers away from the TV. This 
is not an issue with LCD and plasma TVs.

NOTE

• If you wish to paint the speaker grille, refer to page 10 

“PAINTING THE 

S

PEAKER 

GRILLE”

 before proceeding.

Ceiling board thickness and clearance space above ceiling

• Check to ensure that the area you are installing the speaker is free of any 

ceiling joints or studs by tapping the ceiling or using a stud finder.

• Make sure that there is sufficient space on the ceiling for installation and that 

there are no obstructions such as ducts, pipes, etc. 

S

ee the following chart for 

external product dimensions and ceiling installation measurements.

• The thickness required for the ceiling boards is 5 – 30 mm (1/4” – 1-1/8”).

 

IN

S

TALLATION

Before installation

N

S

-IC400

Diameter A

φ

 139 mm (5-1/2”)

Depth B

 84 mm (3-3/8”)

Depth C

79 mm (3-1/8”)

Diameter D

φ

 122 mm (4-3/4”)

A

B
C

D

NS-IC400.book  5 ページ  2010年10月19日 火曜日 午後2時53分

Summary of Contents for NS-IC400

















Reviews: