Yamaha MXT9L 2019 Manual Download Page 94

Page: 94 / 116

Perio

ic maintenance an

justment

7-36

EAU86350

Trou

leshootin

chart

Check the fuel level in
the fuel tank.

1. Fuel

There is enough fuel.

There is no fuel.

Check the battery.

Supply fuel.

The engine does not start.
Check the battery.

Try starting the engine.

4. Compression

There is compression.

There is no compression.

The engine does not start.
Have a Yamaha dealer check the vehicle.

Have a Yamaha dealer check the vehicle.

Remove the spark plug
and check the electrodes.

3. Ignition

Wipe off with a dry cloth and correct the
spark plug gap, or replace the spark plug(s).

Have a Yamaha dealer check the vehicle.

The engine does not start.
Check the compression.

Operate the electric starter.

2. Battery

The engine turns over
quickly.

The engine turns over
slowly.

The battery is good.

Dry

Wet

Try starting the engine.

Check the battery lead connections,
and charge the battery if necessary.

The engine does not start.
Check the ignition.

UBD511E0.book Page 36 Friday, September 13, 2019 11:39 AM

Summary of Contents for MXT9L 2019





















































































































Search results

Summary of Contents for MXT9L 2019

Reviews:

Related manuals for MXT9L 2019

Brands by name

Popular brands

Yamaha MXT9L 2019, Manual

Search results

Summary of Contents for MXT9L 2019

Reviews:

Related manuals for MXT9L 2019

Brands by name

Popular brands