Instrument an
d
control functions
4-14
4
After resetting, “– –.–” will be
shown until the vehicle has trav-
eled a sufficient distance.
The display units cannot be
switched between “km/L”, “L/100
km”, and “MPG” in this mode;
change to the instantaneous fuel
consumption mode first.
Coolant temperature
The temperature of the engine coolant
from 104 °F to 255 °F is shown in 1 °F
increments.
If the message “Hi” flashes, stop the
vehicle, then stop the engine and let it
cool. (See page 7-37.)
TIP
When the coolant temperature is
below 104 °F, “Lo” will be dis-
played.
The coolant temperature varies
with changes in the weather and
engine load.
Air temperature
The temperature of the air drawn into
the intake system from 16 °F to 122 °F
is shown in 1 °F increments.
TIP
16 °F will be displayed even if the
air temperature falls below 16 °F.
The temperature displayed may
vary from the actual ambient tem-
perature.
Bri
g
htness an
d
shift li
g
ht control
mo
d
e
This mode cycles through five control
functions in the order listed below.
Display brightness
Shift light on / flash / off
Shift light on r/min
Shift light off r/min
Shift light brightness
TIP
The brightness level display shows the
selected brightness level.
1. Coolant temperature display
1
1. Air temperature display
1
1. Brightness level display
1
UBD511E0.book Page 14 Friday, September 13, 2019 11:39 AM