Yamaha MXT9L 2019 Manual Download Page 92

Page: 92 / 116

Perio

ic maintenance an

justment

7-34

3. Turn the main switch on and turn

on the electrical circuit in question
to check if the device operates.

4. If the fuse immediately blows

again, have a Yamaha dealer
check the electrical system.

EAU72980

Vehicle li

hts

This model is equipped with full-LED
lighting. There are no user replaceable
bulbs.
If a light does not come on, check the
fuses and then have a Yamaha dealer
check the vehicle.

NOTICE

ECA16581

Do not affix any type of tinte

film or

stickers to the hea

ht lens.

EAU84980

Sta

ility

This model is equipped with a stability
bar.

NOTICE

ECA26440

The sta

ility

ar was not

esi

support the wei

ht of the vehicle. Do

not use the sta

ility

ar as a jackin

point.

Specifie

fuses (fuse

ox 2):

Signaling system fuse:

7.5 A

ABS control unit fuse:

5.0 A

Accessory fuse:

5.0 A

Ignition fuse:

15.0 A

Specifie

fuses (fuse

ox 3):

Hazard fuse:

7.5 A

Terminal fuse 1:

2.0 A

Terminal fuse 2:

2.0 A

Radiator fan motor fuse:

10.0 A

Headlight fuse:

10.0 A

1. Stability bar

UBD511E0.book Page 34 Friday, September 13, 2019 11:39 AM

Summary of Contents for MXT9L 2019





















































































































Search results

Summary of Contents for MXT9L 2019

Reviews:

Related manuals for MXT9L 2019

Brands by name

Popular brands

Yamaha MXT9L 2019, Manual

Search results

Summary of Contents for MXT9L 2019

Reviews:

Related manuals for MXT9L 2019

Brands by name

Popular brands