Yamaha MT-07M 2015, Owner'S Manual

Page: 65 / 110

Perio d ic maintenance an d a d justment
7-12
7
3. If the coolant is at or below the mi-
nimum level mark, remove the res-
ervoir cap.
WARNING! Remove
only the coolant reservoir cap.
Never attempt to remove the ra-
d iator cap when the en g ine is
hot.
[EWA15162]
4. Add coolant to the maximum level
mark, and then install the reservoir
cap.
NOTICE:
If coolant is not
availa b le, use d istille d water or
soft tap water instea d . Do not
use har d water or salt water
since it is harmful to the en g ine.
If water has b een use d instea d
of coolant, replace it with cool-
ant as soon as possi
b le, other-
wise the coolin g system will not
b e protecte d a g ainst frost an d
corrosion. If water has b een
a dd e d to the coolant, have a
Yamaha d ealer check the anti-
freeze content of the coolant as
soon as possi b le, otherwise the
effectiveness of the coolant will
b e re d uce d .
[ECA10473]
EAU59863
To chan g e the coolant
1. Place the vehicle on a level surfa-
ce and let the engine cool if neces-
sary.
2. Place a container under the en-
gine to collect the used coolant.
3. Remove the radiator cap retaining
bolt and radiator cap. WARNING!
Never attempt to remove the ra-
d iator cap when the en g ine is
hot.
[EWA10382]
1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark
1
2
3
1. Coolant reservoir cap
1
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
U1WS2AE0.book Page 12 Monday, December 7, 2015 2:00 PM