Yamaha MT-07M 2015 Owner'S Manual Download

Page: 90 / 110

Perio

ic maintenance an

justment

7-37

EAU44792

Front wheel (for non-ABS
mo

els)

WARNING

EWA14841

For the ABS mo

el, have a Yamaha

ealer remove an

install the wheel.

EAU61491

To remove the front wheel

WARNING

EWA10822

To avoi

injury, securely support the

vehicle so there is no

er of it

fallin

over.

1. Loosen the front wheel axle pinch

bolt, then the wheel axle and the
brake caliper bolts.

2. Lift the front wheel off the ground

according to the procedure in the
previous section “Supporting the
motorcycle”.

3. Remove the brake hose holder on

the left side by removing the bolt.

4. Remove the reflector and the

brake caliper on each side by re-
moving the bolts.

NOTICE:

not apply the

rake after the

rake calipers have

een re-

move

, otherwise the

rake

s will

e force

shut.

[ECA11052]

5. Pull the wheel axle out, and then

remove the wheel.

To install the front wheel

1. Lift the wheel up between the fork

legs.

1. Front wheel axle pinch bolt
2. Wheel axle
3. Brake caliper bolt

1. Brake hose holder
2. Brake hose holder bolt
3. Reflector
4. Brake caliper
5. Brake caliper bolt

U1WS2AE0.book Page 37 Monday, December 7, 2015 2:00 PM

Summary of Contents for MT-07M 2015















































































































Search results

Summary of Contents for MT-07M 2015

Reviews:

Related manuals for MT-07M 2015

Brands by name

Popular brands

Yamaha MT-07M 2015, Owner'S Manual

Search results

Summary of Contents for MT-07M 2015

Reviews:

Related manuals for MT-07M 2015

Brands by name

Popular brands