Yamaha MT-03 2017, Owner'S Manual

Page: 56 / 96

Perio d ic maintenance an d a d justment
6-12
6
3. If the coolant is at or below the
minimum level mark, remove the
coolant reservoir cover by remov-
ing the bolts, remove the coolant
reservoir cap, and then add cool-
ant to the maximum level mark.
WARNING! Remove only the
coolant reservoir cap. Never at-
tempt to remove the ra
d iator
cap when the en g ine is hot.
[EWA15162]
NOTICE:
If coolant is not
availa b le, use d istille d water or
soft tap water instea d . Do not
use har d water or salt water
since it is harmful to the en g ine.
If water has b een use d instea d
of coolant, replace it with cool-
ant as soon as possi
b le, other-
wise the coolin g system will not
b e protecte d a g ainst frost an d
corrosion. If water has b een
a dd e d to the coolant, have a
Yamaha d ealer check the anti-
freeze content of the coolant as
soon as possi
b le, otherwise the
effectiveness of the coolant will
b e re d uce d .
[ECA10473]
4. Install the reservoir cap, and then
install the coolant reservoir cover
by installing the bolts.
EAU33032
Chan g in g the coolant
The coolant must be changed at the in-
tervals specified in the periodic mainte-
nance and lubrication chart. Have a
Yamaha dealer change the coolant.
WARNING! Never attempt to remove
the ra
d iator cap when the en g ine is
hot.
[EWA10382]
1. Bolt
2. Coolant reservoir cover
2
1
1. Coolant reservoir cap
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
1
UB9AE0E0.book Page 12 Thursday, March 23, 2017 2:48 PM