Yamaha MOXF8 Reference Manual Download Page 29

Page: 29 / 163

MOXF6/MOXF8 Reference Manual

Voice Mode

Normal Voice Edit

Supplementary Information

OctaveRange

Specifies the maximum Arpeggio range in octaves.

Settings:

-3 – +0 – +3

Loop

Determines whether the Arpeggio plays through a single time or continuously, while notes are held.

Settings:

off, on

TriggerMode

When this is set to “gate,” pressing the note starts Arpeggio playback and releasing the note stops it. When this is set to

“toggle,” pressing the note starts/stops Arpeggio playback and releasing the note does not affect Arpeggio playback.

Settings:

gate, toggle

AccntVelTh (Accent Velocity Threshold)

Determines the minimum velocity that will trigger the Accent Phrase.

Settings:

off, 1 – 127

AccntStrtQtz (Accent Start Quantize)

Determines the start timing of the Accent Phrase when the Velocity specified in Accent Velocity Threshold above is

received. When this is set to off, the Accent Phrase starts as soon as the Velocity is received. When this is set to on, the

Accent Phrase starts on the beat specified for each Arpeggio type after the Velocity is received.

Settings:

off, on

RandomSFX

Determines whether Random SFX is active or not.

Settings:

off, on

SFXVelOffset (Random SFX Velocity Offset)

Determines the offset value by which the Random SFX notes will be shifted from their original velocities.

Settings:

-64 – +0 – +63

SFXKeyOnCtrl (Random SFX Key on Control)

When this is set to “on,” a special Random SFX sound is played at a pre-programmed velocity. When this is set to “off,”

the Random SFX sound is played at the velocity generated by the playing of each note.

Settings:

off, on

Fixed SD/BD

This parameter is available only when a Drum Voice is assigned. When this parameter is set to on, C1 will be used as

the note of the Bass Drum and D1 will be used as the note of the Snare Drum in Arpeggio playback.

Settings:

off, on

Knob

Summary of Contents for MOXF8




































































































































































Search results

Summary of Contents for MOXF8

Reviews:

Related manuals for MOXF8

Brands by name

Popular brands

Yamaha MOXF8, Reference Manual

Search results

Summary of Contents for MOXF8

Reviews:

Related manuals for MOXF8

Brands by name

Popular brands