Yamaha MOXF8 Reference Manual Download Page 55

Page: 55 / 163

MOXF6/MOXF8 Reference Manual

Performance Mode

Performance Record

Supplementary Information

Performance Mode

The Performance mode is used for selecting, playing, and editing the desired Performance. Performances can be

made up of a maximum of four Parts (Voices), selected from the internal tone generator Parts 1 – 4. This section

explains each parameter in four types (Performance Play, Performance Edit, Performance Job, and Performance

Record).

Performance Play

Performance Play is the main “portal” by which you enter the Performance mode, and it is here where you select and

play a Performance.

Performance Play display

Performance Bank

Performance Number

Indicates the Bank and Number of the selected Performance.

Favorite Category indicator

When setting the currently selected Performance to the Favorite category, this indicator will appear.

Category

Indicates the Main category and Sub category of the currently selected Performance.

TCH (Transmit Channel)

Indicates the Keyboard MIDI transmit channel. You can change the Keyboard MIDI transmit channel by pressing the

[TRACK] button so that its indicator lights and pressing any of the Number [1] – [16] buttons. The Keyboard MIDI

transmit channel can be changed also with the following operation: [UTILITY]



[F6] MIDI



[SF1] CH



“KBDTransCh.”

(Arpeggio Tempo)

Indicates the arpeggio tempo set for the currently selected Performance.

NOTE

This parameter can be set also by holding the [SHIFT] button and pressing the [ENTER] button several times repeatedly at the

desired tempo. This function is referred to as “Tap Tempo.”

OCT (Octave)

Indicates the Keyboard Octave setting.

[SF1] ARP1 (Arpeggio 1) – [SF6] ARP6 (Arpeggio 6)

The Arpeggio types are assigned to the buttons with 8th note icons on the display tab. You can call them up by pressing

these buttons any time during your keyboard performance. The Arpeggio Type can be set in the Arpeggio Edit display

(

page 57

Operation

Press the [PERFORM] button.

[F1] PLAY

Summary of Contents for MOXF8




































































































































































Search results

Summary of Contents for MOXF8

Reviews:

Related manuals for MOXF8

Brands by name

Popular brands

Yamaha MOXF8, Reference Manual

Search results

Summary of Contents for MOXF8

Reviews:

Related manuals for MOXF8

Brands by name

Popular brands