manualshive.com logo in svg

Yamaha KODIAK 700 2018, Owner'S Manual, Page: 22 / 180

Share
Download
Yamaha KODIAK 700 2018 Owner'S Manual Download Page 22

1-11

1

Recommended

Minimum

: FRONT
  REAR
: FRONT
  REAR

: 35 kPa,  (5.0 psi)
: 30 kPa,  (4.4 psi)
: 32 kPa,  (4.6 psi)
: 27 kPa,  (4.0 psi)

Never set tire pressure below minimum. It could cause
the tire to dislodge from the rim.

Cargo or a trailer can affect stability and handling.
Read owner’s manual before loading or towing.
When riding with cargo or towing a trailer : Reduce speed
and allow more room to stop. Avoid hills and rough terrain.
Maximum Vehicle Load : 240 kg, (530 lbs)
Includes weight of operator, cargo and accessories
(and if applicable, trailer tongue weight).

WARNING

B16-F816M-00

YAMAHA

IMPROPER TIRE PRESSURE OR OVERLOADING CAN
CAUSE LOSS OF CONTROL.
LOSS OF CONTROL CAN RESULT IN SEVERE
INJURY OR DEATH.

OPERATING TIRE PRESSURE :

 Set with tires cold

LOADING/TRAILER TOWING

WARNING

NEVER

  operate  this  ATV  if  you  are

under  age  

16

.

Operating this ATV if you are under
the age of 

16

 increases your chance 

of severe injury or death.

16

UNDER

1P0-F816L-01

Wait for the engine to return to normal idle speed

before shifting.

2UD-F151E-00

5

6

7

UB5K60E0.book  Page 11  Monday, May 28, 2018  11:35 AM

Summary of Contents for KODIAK 700 2018





















































































































































































Reviews:

No comments