background image

 SERVICE PRECAUTIONS

Safety measures

•  Some internal parts in this product contain high voltages and are dangerous.

Be sure to take safety measures during servicing, such as wearing insulating gloves.

•  Note that the capacitors indicated below are dangerous even after the power is turned off because an electric charge 

remains and a high voltage continues to exist there.
Before starting any repair work, connect a discharging resistor (5 k-ohms/10 W) to the terminals of each capacitor 
indicated below to discharge electricity.
The time required for discharging is about 30 seconds per each.

C1082–C1085 on MAIN P.C.B.

C3706 on VIDEO (2) P.C.B.

For details, refer to “PRINTED CIRCUIT BOARDS”.

RX-A720

VIDEO (2)  P.C.B.

VIDEO (3) P.C.B.

OPERATION (8) P.C.B.

MAIN (2) P.C.B.

DIGITAL (1) P.C.B.

VIDEO (1) P.C.B.

VIDEO (4) P.C.B.

AM/FM TUNER

OPERATION (2) P.C.B.

OPERATION (7) P.C.B.

OPERATION (11) P.C.B.

OPERATION (9) P.C.B. (U, C models)

OPERATION (10) P.C.B. (A model)

MAIN (1) P.C.B.

MAIN (6) P.C.B.

VIDEO (7) P.C.B.

VIDEO (6) P.C.B.

POWER TRANSFORMER

OPERATION (5) P.C.B.

OPERATION (6) P.C.B.

OPERATION (3) P.C.B.

OPERATION (4) P.C.B. 

OPERATION (1) P.C.B. 

DIGITAL (2) P.C.B.

OPERATION (12) P.C.B.

Top view

Front view

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

19

21

23

22

20

24

25

1

7

9

12

18

10

15

4

2

3

5

6

8

13

14

11

16

17

17

RX-V673/HTR-6065/RX-A720

RX-V673/HTR-6065/

RX-A720

Summary of Contents for HTR-6065





























































Reviews: