Yamaha HTR-6065 Service Manual Download Page 34

Page: 34 / 60

●

Functions in Self-Diagnostic Function mode

In addition to the self-diagnostic function menu items, functions listed below are available.

• Power

ON/OFF

• Master

volume

• Muting
• Input

selection

• Zone

control

Functions related to the tuner and the set menu are not available.

●

Initial settings when Self-Diagnostic Function started

The following initial settings are used when self-diagnostic function is started.

•

Master volume:

-20 dB / Zone volume: +2.5dB

•

Input:

HDMI1 / Zone input: AUDIO1

•

Main menu:

A1-1. DSP MARGIN

•

Speaker setting:

LARGE, Bass out to SWFR (All channels)

• HDMI

Control:

Off

• Zone

When self-diagnostic function is canceled, these settings are restored to those before starting self-diagnostic function.

●

Operation procedure of Main menu and Sub-menu

There are 22 main menu items, each of which has sub-menu items.

Main menu selection

Select the main menu using “SCENE TV” (forward) and “SCENE BD/DVD” (reverse) keys.

Sub-menu selection

Select the sub-menu using “SCENE RADIO” (forward) and “SCENE NET” (reverse) keys.

Keys of this unit

Reverse

Forward

Main menu selection

Reverse

Forward

Sub-menu selection

RX-V673/HTR-6065/RX-A720

RX-V673/HTR-6065/

RX-A720

Summary of Contents for HTR-6065





























































Search results

Summary of Contents for HTR-6065

Reviews:

Related manuals for HTR-6065

Brands by name

Popular brands

Yamaha HTR-6065, Service Manual

Search results

Summary of Contents for HTR-6065

Reviews:

Related manuals for HTR-6065

Brands by name

Popular brands