Yamaha HTR-6065 Service Manual Download Page 11

Page: 11 / 60

U ........................U.S.A.  model
C ..................Canadian  model
R .....................General  model
T..................... Chinese model
K ...................... Korean  model
A .................Australian  model

B .......................British  model
G ..................European  model
F..................... Russian model
L..................Singapore model
S ...................Brazirian model
H ...........................Thai  model

■

AM Section

Tuning Range

U, C models ........................................................... 530 to 1,710 kHz

R, L, S, H models ............................ 530 to 1,710 / 531 to 1,611 kHz

T, K, A, B, G, F models .......................................... 531 to 1,611 kHz

Antenna

..................................................................................... Loop antenna

■

General

Power Supply

U, C models ............................................................ AC 120 V, 60 Hz

R, S models .................................AC 110–120/220–240 V, 50/60 Hz

T model ................................................................... AC 220 V, 50 Hz

K model .................................................................. AC 220 V, 60 Hz

A model .................................................................. AC 240 V, 50 Hz

B, G, F models ........................................................ AC 230 V, 50 Hz

L, H models ............................................... AC 220–240 V, 50/60 Hz

Power Consumption

U, C models ..............................................................400 W / 500 VA

R, L, S, H models .................................................................... 300 W

T, K, A, B, G, F models ........................................................... 330 W

Standby Power Consumption (reference data)

HDMI control: OFF / Standby through: OFF

................................................................................ 0.1 W (typical)

HDMI control: ON / Standby through: ON

INPUT: HDMI1

(HDMI no signal)

............................................................................. 3.0 W (typical)

Network standby: ON

................................................................................ 2.0 W (typical)

Maximum Power Consumption

[R, L, S, H models]

................................................................................................ 590 W

Dimensions (W x H x D)

[RX-V673/HTR-6065]

............................ 435 x 171 x 364 mm (17-1/8" x 6-3/4" x 14-3/8")

[RX-A720]

............................ 435 x 171 x 367 mm (17-1/8" x 6-3/4" x 14-1/2")

Weight

[RX-V673/HTR-6065]

........................................................................... 10.2 kg (22.5 lbs.)

[RX-A720]

........................................................................... 10.7 kg (23.6 lbs.)

Finish

[RX-V673]

T model ..........................................................................Gold color

U, C, R, T, K, A, B, G, F, L, S, H models ....................... Black color

R, B, G, F, L, H models .............................................Titanium color

[HTR-6065]

A, F models .................................................................. Black color

[RX-A720]

U, C, A models ............................................................. Black color

Accessories

Remote control ..............................................................................x 1

Batteries (R03, AAA, UM-4) ..........................................................x 2

FM antenna (1.4 m) ......................................................................x 1

AM antenna (1.0 m) ......................................................................x 1

YPAO microphone (6.0 m) ............................................................x 1

Remote control sheet (T model) ...................................................x 1

Power cable (2.0 m) (RX-A720) ....................................................x 1

Specifications are subject to change without notice.

Manufactured under license from Dolby Laboratories. Dolby, Pro Logic and
the double-D symbol are trademarks of Dolby Laboratories.

“x.v.Color” is a trademark of Sony Corporation.

DTS-HD, the Symbol, & DTS-HD and the Symbol together are registered
trademarks & DTS-HD Master Audio is a trademark of DTS, Inc.

AirPlay, the AirPlay logo, iPad, iPhone, iPod, iPod nano, and iPod touch are
trademarks of Apple Inc., registered in the U.S. and other countries.

MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and
Thomson.

“HDMI,” the “HDMI” logo and “High-Definition Multimedia Interface” are
trademarks, or registered trademarks of HDMI Licensing LLC.

This receiver supports network connections.

RX-V673/HTR-6065/RX-A720

RX-V673/HTR-6065/

RX-A720

Summary of Contents for HTR-6065





























































Search results

Summary of Contents for HTR-6065

Reviews:

Related manuals for HTR-6065

Brands by name

Popular brands

Yamaha HTR-6065, Service Manual

Search results

Summary of Contents for HTR-6065

Reviews:

Related manuals for HTR-6065

Brands by name

Popular brands