Yamaha HTR-6065 Service Manual Download Page 30 | Manualshive

Page: 30 / 60

background image

CAUTION!

Using this unit with the protection function disabled may cause further damage to this unit. Use special care for this point
when using this mode.

●

Starting Self-Diagnostic Function in the protection cancel mode

If the protection function works and causes hindrance to troubleshooting, cancel the protection function by the procedure
below, and it will be possible to enter the self-diagnostic function mode. (The protection functions other than the excess
current detect function will be disabled.)

While pressing the “TONE CONTROL” and “INFO” keys, press the “MAIN ZONE ” key to turn on the power and keep
pressing those 2 keys and “MAIN ZONE ” key for 3 seconds or longer.

The self-diagnostic function mode is activated with the protection functions disabled.

In this mode, the “SLEEP” segment of the FL display flashes to indicate that the mode is self-diagnostic function mode with the
protection functions disabled.

●

Starting Self-Diagnostic Function

While pressing the “TONE CONTROL” and “INFO” keys, press the “MAIN ZONE ” key to turn on the power, and release
those 2 keys.

The self-diagnostic function mode is activated.

Keys of this unit

RX-V673/HTR-6065

RX-A720

While pressing these keys, turn on the power.

While pressing these keys, turn on the power.

30

RX-V673/HTR-6065/RX-A720

RX-V673/HTR-6065/

RX-A720

«
...
28
29
30
31
32
...
»

Summary of Contents for HTR-6065





























































Reviews:

No comments

Related manuals for HTR-6065

Brand: Magnadyne Pages: 16

Brand: Zenith Pages: 32

Brand: Lanzar Pages: 19

SV 517 RDS/BT DAB

Brand: Majestic Pages: 13

Brand: Alpine Pages: 38

Brand: Safeguard Supply Pages: 2

Brand: VDO Pages: 2

Brand: Hammarlund Pages: 10

Brand: Lanzar Pages: 11

Brand: GRAUPNER Pages: 16

Brand: TechnoTrend Pages: 64

Brand: Pioneer Pages: 6

Brand: Pioneer Pages: 8

Brand: Pioneer Pages: 8

Brand: Pioneer Pages: 6

Brand: Pioneer Pages: 37

Brand: Pioneer Pages: 52

Brand: Pioneer Pages: 52

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands