manualshive.com logo in svg

Yamaha GRIZZLY 550 FI YFM5FGPSEY, Owner'S Manual

The Yamaha GRIZZLY 550 FI YFM5FGPSEY Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides a detailed guide on operating and maintaining the powerful Yamaha GRIZZLY 550 FI YFM5FGPSEY, ensuring users can maximize their enjoyment and safety with this exceptional product.

Share
Download
background image

7-20

7

WARNING

EWB01640

Never operate this ATV in fast flowing water or
in water deeper than that specified in your
Owner’s Manual. Remember that wet brakes
may have reduced stopping ability. Test your
brakes after leaving water. If necessary, apply
them several times to let friction dry out the lin-
ings. If the ATV is operated through deep or
fast flowing water, the tires may float, causing
loss of traction and loss of control, which
could lead to an accident.

Test your brakes after leaving the water. Do not
continue to ride your ATV without verifying that you
have regained proper braking ability.

NOTICE

ECB00840

After riding your ATV in water, be sure to drain
the trapped water by removing the check hos-
es at the bottom of the air filter case. Also, re-
move the drain plugs from the front and rear
storage compartments and the V-belt case to
drain any water that may have accumulated.
Wash the ATV with fresh water if it has been
operated in salt water or muddy conditions.

U34D60E0.book  Page 20  Tuesday, June 17, 2008  6:34 PM

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY







































































































































































Reviews:

No comments

Related manuals for GRIZZLY 550 FI YFM5FGPSEY

Brands by name

Popular brands

Load more brands