Yamaha GRIZZLY 550 FI YFM5FGPSEY Owner'S Manual Download

Page: 157 / 166

10-2

Engine oil:

Type:

SAE 5W-30 or SAE 10W-30 or SAE 10W-40 or SAE
15W-40 or SAE 20W-40 or SAE 20W-50

Recommended engine oil grade:

API service SG type or higher, JASO standard MA

Engine oil quantity:

Without oil filter cartridge replacement:

2.00 L (2.11 US qt, 1.76 Imp.qt)

With oil filter cartridge replacement:

2.10 L (2.22 US qt, 1.85 Imp.qt)

Final gear oil:

Type:

SAE 80 API GL-4 Hypoid gear oil

Quantity:

0.20 L (0.21 US qt, 0.18 Imp.qt)

Differential gear oil:

Type:

SAE 80 API GL-4 Hypoid gear oil

Quantity:

0.22 L (0.23 US qt, 0.19 Imp.qt)

Cooling system:

Coolant reservoir capacity (up to the maximum level mark):

0.24 L (0.25 US qt, 0.21 Imp.qt)

Radiator capacity (including all routes):

1.99 L (2.10 US qt, 1.75 Imp.qt)

Air filter:

Air filter element:

Wet element

Fuel:

Recommended fuel:

Regular unleaded gasoline only (EUR)
Unleaded gasoline only (AUS)(NZL)

Fuel tank capacity:

20.0 L (5.28 US gal, 4.40 Imp.gal)

Fuel reserve amount:

4.5 L (1.19 US gal, 0.99 Imp.gal)

Fuel injection:

Throttle body:

Type/quantity:

40EIS/1

Manufacturer:

MIKUNI

Spark plug (s):

Manufacturer/model:

NGK/LMAR6A-9

-20

-10

50 ˚C

SAE 15W-40

SAE 20W-40

SAE 20W-50

SAE 10W-40

SAE 5W-30

SAE 10W-30

U34D60E0.book Page 2 Tuesday, June 17, 2008 6:34 PM

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY







































































































































































Search results

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY

Reviews:

Related manuals for GRIZZLY 550 FI YFM5FGPSEY

Brands by name

Popular brands

Yamaha GRIZZLY 550 FI YFM5FGPSEY, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY

Reviews:

Related manuals for GRIZZLY 550 FI YFM5FGPSEY

Brands by name

Popular brands