Yamaha GRIZZLY 550 FI YFM5FGPSEY Page 106 Owner'S Manual Download

Page: 106 / 166

8-21

2. Check the spark plug for electrode erosion

and excessive carbon or other deposits, and
replace it if necessary.

To install the spark plug

1. Measure the spark plug gap with a wire thick-

ness gauge and, if necessary, adjust the gap
to specification.

2. Clean the surface of the spark plug gasket

and its mating surface, and then wipe off any
grime from the spark plug threads.

3. Install the spark plug with the spark plug

wrench, and then tighten it to the specified
torque.

Specified spark plug:

NGK/LMAR6A-9

Spark plug gap:

0.8–0.9 mm (0.031–0.035 in)

1. Spark plug gap

Tightening torque:

Spark plug:

12.5 Nm (1.25 m·kgf, 9.0 ft·lbf)

U34D60E0.book Page 21 Tuesday, June 17, 2008 6:34 PM

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY







































































































































































Search results

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY

Reviews:

Related manuals for GRIZZLY 550 FI YFM5FGPSEY

Brands by name

Popular brands

Yamaha GRIZZLY 550 FI YFM5FGPSEY, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY

Reviews:

Related manuals for GRIZZLY 550 FI YFM5FGPSEY

Brands by name

Popular brands