Yamaha GRIZZLY 550 FI YFM5FGPSEY Page 149 Owner'S Manual Download

Page: 149 / 166

8-64

EBU25701

Installing a wheel

1. Place the ATV on a level surface.
2. Install the wheel and the nuts.

TIP

●

The arrow mark

on the tire must point toward

the rotating direction of the wheel.

●

Tapered nuts are used for both the front and rear
wheels. Install the nuts with their tapered side to-
wards the wheel.

3. Lower the ATV to the ground.
4. Tighten the wheel nuts to the specified

torques.

1. Arrow mark

1. Tapered nut

Tightening torques:

Front wheel nut:

55 Nm (5.5 m·kgf, 40 ft·lbf)

Rear wheel nut:

55 Nm (5.5 m·kgf, 40 ft·lbf)

U34D60E0.book Page 64 Tuesday, June 17, 2008 6:34 PM

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY







































































































































































Search results

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY

Reviews:

Related manuals for GRIZZLY 550 FI YFM5FGPSEY

Brands by name

Popular brands

Yamaha GRIZZLY 550 FI YFM5FGPSEY, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY

Reviews:

Related manuals for GRIZZLY 550 FI YFM5FGPSEY

Brands by name

Popular brands