manualshive.com logo in svg

Yamaha GRIZZLY 550 FI YFM5FGPSEY, Owner'S Manual

The Yamaha GRIZZLY 550 FI YFM5FGPSEY Owner's Manual is available for free download at manualshive.com. This comprehensive manual provides a detailed guide on operating and maintaining the powerful Yamaha GRIZZLY 550 FI YFM5FGPSEY, ensuring users can maximize their enjoyment and safety with this exceptional product.

Share
Download
background image

4-13

4

Before starting the engine, check the throttle to be
sure it is operating smoothly. Make sure it returns
to the idle position as soon as the lever is released.

WARNING

EWB00250

Malfunction of the throttle could make it diffi-
cult to speed up or slow down when you need
to. This could cause an accident. Check the op-
eration of the throttle lever before you start the
engine. If the throttle does not work smoothly,
check for the cause. Correct the problem be-
fore riding the ATV or consult a Yamaha dealer.

EBU18321

Speed limiter 

Your ATV was delivered with an adjustable speed
limiter. The speed limiter keeps the throttle from
fully opening, even when the throttle lever is
pushed to the maximum.

1. Loosen the locknut.
2. To increase the maximum engine power avail-

able and the maximum speed of the ATV, turn
the adjusting screw in direction (a). To de-
crease the maximum engine power available
and the maximum speed of the ATV, turn the
adjusting screw in direction (b).

1. Throttle lever

2WD

4WD

1

1. Locknut

2. Adjusting screw

3. No more than 12 mm (0.47 in)

2

1

3

(b)

(a)

U34D60E0.book  Page 13  Tuesday, June 17, 2008  6:34 PM

Summary of Contents for GRIZZLY 550 FI YFM5FGPSEY







































































































































































Reviews:

No comments

Related manuals for GRIZZLY 550 FI YFM5FGPSEY

Brands by name

Popular brands

Load more brands