Yamaha GRIZZLY 450, Owner'S Manual

Page: 142 / 176

8-49
8
To store the battery
1. If the ATV will not be used for more than one
month, remove the battery, fully charge it, and
then place it in a cool, dry place.
2. If the battery will be stored for more than two
months, check it at least once a month and ful-
ly charge it if necessary.
To install the battery
NOTE:
Be sure the battery is fully charged.
1. Place the battery in its compartment.
2. Make sure to properly connect the battery
leads to the battery terminals.
CAUTION:
ECB00630
●
Always keep the battery charged. Storing a
discharged battery can cause permanent
battery damage.
●
To charge a sealed-type (MF) battery, a spe-
cial constant-voltage battery charger is re-
quired. Using a conventional battery charger
will damage the battery. If you do not have
access to a constant-voltage battery charg-
er, have a Yamaha dealer charge your bat-
tery.
1. Positive battery terminal
2. Negative battery terminal
U1D913E0.book Page 49 Thursday, April 20, 2006 2:47 PM