Yamaha GRIZZLY 450 Owner'S Manual Download Page 139 | Manualshive

Page: 139 / 176

background image

8-46

8

EBU24950

Checking and lubricating the brake
pedal

The operation of the brake pedal should be
checked before each ride, and the pedal pivot
should be lubricated if necessary.

NOTE:

To access the brake pedal pivot, remove panel B.
(See page 8-9.)

EBU24961

Checking the wheel bearings

The front and rear wheel bearings must be
checked at the intervals specified in the periodic
maintenance and lubrication chart. If there is play
in a wheel hub or if a wheel does not turn smoothly,
have a Yamaha dealer check the wheel bearings.

EBU24970

Lubricating the drive shaft universal
joint

The drive shaft universal joint must be lubricated at
the intervals specified in the periodic maintenance
and lubrication chart.
Lubricate the universal joint using a grease gun.

Recommended lubricant:

Lithium-soap-based grease (all-purpose
grease)

U1D913E0.book Page 46 Thursday, April 20, 2006 2:47 PM

«
...
137
138
139
140
141
...
»

Summary of Contents for GRIZZLY 450

















































































































































































Reviews:

No comments

Related manuals for GRIZZLY 450

Brand: Abbey Machinery Pages: 72

Brand: E-TON Pages: 35

Brand: Yamaha Pages: 92

Brand: Kayo Pages: 4

Brand: Can-Am Pages: 136

Brand: KYMCO Pages: 171

Workman 133-0959

Brand: Toro Pages: 8

Workman MDE 07299

Brand: Toro Pages: 44

Brand: Toro Pages: 56

Workman HDX 07383

Brand: Toro Pages: 68

Brand: Crossfire Pages: 56

Brand: Crossfire Pages: 56

Brand: SMC Networks Pages: 93

Brand: Polaris Pages: 135

Brand: Polaris Pages: 117

Brand: Polaris Pages: 121

Brand: Polaris Pages: 162

2014 RANGER 400

Brand: Polaris Pages: 106

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands