Yamaha GRIZZLY 450 Owner'S Manual Download Page 40

Page: 40 / 176

4-21

CAUTION:

ECB00130

Do not store metal or sharply edged objects,
like tools, in the storage compartment. If they
must be stored, wrap them in appropriate
cushion material to prevent damaging the stor-
age compartment.

●

Do not exceed the load limit of 2.0 kg (4 lb)
for the storage compartment.

●

Do not exceed the maximum load of 210.0 kg
(463 lb) for the ATV.

NOTE:

There is a check hose at the bottom of the storage
compartment. If any water collects in this hose, re-
move the hose, empty it, and then install it.

EBU18960

Front carrier

●

Do not exceed the load limit of 40.0 kg (88 lb) for
the front carrier.

●

Do not exceed the maximum load of 210.0 kg
(463 lb) for the ATV.

1. Storage compartment

1. Storage compartment check hose

U1D913E0.book Page 21 Thursday, April 20, 2006 2:47 PM

Summary of Contents for GRIZZLY 450

















































































































































































Search results

Summary of Contents for GRIZZLY 450

Reviews:

Related manuals for GRIZZLY 450

Brands by name

Popular brands

Yamaha GRIZZLY 450, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 450

Reviews:

Related manuals for GRIZZLY 450

Brands by name

Popular brands