Yamaha GRIZZLY 450 Owner'S Manual Download Page 56

Page: 56 / 176

6-4

3. Release the brake pedal, and then open the

throttle lever gradually.

Shifting: Neutral to Reverse and Reverse to
Park

NOTE:

The drive select lever cannot be shifted into or from
reverse or park without applying the brake pedal.

1. Bring the ATV to a complete stop.

2. Apply the brake pedal.
3. Shift from neutral to reverse or from reverse to

park and vice versa by moving the drive select
lever along the shift guide.

NOTE:

●

When in reverse, the reverse indicator light
should come on. If the indicator light does not
come on, have a Yamaha dealer check the elec-
trical circuit.

1. Drive select lever
2. L (Low-range)

3. H (High-range)

4. N (Neutral)
5. R (Reverse)

6. P (Park)

1. Drive select lever
2. L (Low-range)

3. H (High-range)

4. N (Neutral)
5. R (Reverse)

6. P (Park)

U1D913E0.book Page 4 Thursday, April 20, 2006 2:47 PM

Summary of Contents for GRIZZLY 450

















































































































































































Search results

Summary of Contents for GRIZZLY 450

Reviews:

Related manuals for GRIZZLY 450

Brands by name

Popular brands

Yamaha GRIZZLY 450, Owner'S Manual

Search results

Summary of Contents for GRIZZLY 450

Reviews:

Related manuals for GRIZZLY 450

Brands by name

Popular brands