manualshive.com logo in svg

Yamaha GP1300R WaveRunner 2008, Owner'S/Operator'S Manual

Share
Download
Yamaha GP1300R WaveRunner 2008 Owner'S/Operator'S Manual Download Page 88

Trouble recovery

83

EJU34620

Emergency procedures 

EJU34630

Cleaning the jet intake and impeller 

If weeds or debris get caught in the jet intake
or impeller, cavitation can occur, causing jet
thrust to decrease even though engine speed
rises. If this condition is allowed to continue,
the engine will overheat and may seize. If
there is any sign that the jet intake or impeller
is clogged with weeds or debris, return to
shore and check the intake and impeller. Al-
ways stop the engine before beaching the wa-
tercraft.

WARNING

EWJ00780

Before attempting to remove weeds or de-
bris from the jet intake or impeller area,
shut the engine off and remove the clip
from the engine shut-off switch. Severe in-
jury or death could result from coming in

contact with the rotating parts of the jet
pump.

CAUTION:

ECJ00650

If weeds or debris get caught in the jet in-
take, do not operate the watercraft above
trolling speed until they have been re-
moved.

(1) Turn the watercraft on its side as shown.

UF1G15E0.book  Page 83  Thursday, May 31, 2007  9:09 AM

Summary of Contents for GP1300R WaveRunner 2008



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands