manualshive.com logo in svg

Yamaha GP1300R WaveRunner 2008, Owner'S/Operator'S Manual

Share
Download
Yamaha GP1300R WaveRunner 2008 Owner'S/Operator'S Manual Download Page 34

Features and functions

29

switch, such as if the operator falls off the wa-
tercraft.

WARNING

EWJ00010

●

Always attach the engine shut-off cord
to your left wrist and the clip to the en-
gine shut-off switch BEFORE starting
the engine.

●

To prevent accidental starting of the en-
gine or unauthorized use by children or
others, always remove the clip from the
engine shut-off switch when the engine
is not running.

EJU31180

Start switch 

Push the start switch (green button) to start
the engine.

NOTE:

The engine will not start when the clip is re-
moved from the engine shut-off switch or if the
throttle lever is squeezed.

EJU31210

Throttle lever 

Squeeze the throttle lever to increase engine
speed.

Release the throttle lever to decrease engine
speed or to return it to the idle position.

EJU31231

Cooling water pilot outlets 

This watercraft is equipped with cooling water
pilot outlets.

1

Clip

2

Engine shut-off cord

3

Engine shut-off switch

1

Start switch

1

Throttle lever

UF1G15E0.book  Page 29  Thursday, May 31, 2007  9:09 AM

Summary of Contents for GP1300R WaveRunner 2008



































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands