Yamaha GP1300R WaveRunner 2008, Owner'S/Operator'S Manual

Page: 36 / 98

Features and functions
31
put until you apply throttle again or you reach
trolling speed.
EJU31311
Quick Shift Trim System (QSTS)
selector
The QSTS selector is located at the left han-
dlebar grip and is used to adjust the trim angle
of the watercraft.
Operating the QSTS selector changes the an-
gle of the jet thrust nozzle vertically. This
changes the trim angle of the watercraft.
There are 5 positions: 2 bow-down positions
(a) and (b), neutral “N”, and 2 bow-up posi-
tions (c) and (d).
To change the trim angle:
(1) Reduce engine speed to less than 3000
r/min.
(2) Squeeze the QSTS selector lock lever,
and then turn the QSTS selector to the
desired position.
(3) Release the lock lever to lock the QSTS
selector.
CAUTION:
ECJ00011
Do not turn the QSTS selector while oper-
ating the watercraft at an engine speed of
3000 r/min or more, otherwise damage
could occur to the QSTS.
The neutral “N” position will provide good per-
formance for most operating conditions.
1 Quick Shift Trim System (QSTS) selector
2 QSTS selector lock lever
UF1G15E0.book Page 31 Thursday, May 31, 2007 9:09 AM