–7–
CABLE ROUTING
SPEC
1
Right handlebar switch lead
2
Throttle cables
3
Horn lead
4
Wire harness
5
Rear brake light switch lead
6
Neutral switch lead
7
Fuel tank breather hose
8
Crankshaft position sensor lead
9
Meter lead and left handlebar lead
A Pass the right handlebar switch lead through the
hole on the right side of the frame.
Route it under the inside of the throttle cable and
wire harness.
B Pass the throttle cable through the hole located on
the right side of the frame.
Route the throttle cable above the wire harness.
C Route the horn lead inner side of the coolant reser-
voir tank hose.
D Clamp the horn lead and radiator hose (the external
side only). Horn lead should be positioned inside of
the hose. Install the clamp in the direction pointing
its detent pawl to the downside.
E Route the right handlebar switch lead under the
bracket 2.
F Route the coolant reservoir tank hose under the
cover 2. Route the radiator hose (outside) inner
side.
G Route the radiator hoses (2 pieces) under the cover
2.
H Route the crank shaft position sensor lead inner
side of the radiator hose.
Summary of Contents for FZ6-N 2004
