FEATURES
1-28
NOTE:
1.
• If the ambient temperature falls below -9 °C, a
lower temperature than -9 °C will not be dis-
played.
• If the ambient temperature climbs above 50 °C,
a higher temperature than 50 °C will not be dis-
played.
• The accuracy of the temperature reading may
be affected when riding slowly [approximately
under 20 km/h (12.5 mi/h)] or when stopped at
traffic signals, railroad crossings, etc.
Instantaneous fuel consumption mode
This display shows the distance that can be trav-
eled on 1.0 Imp.gal of fuel under the current
riding conditions.
NOTE:
1.
If traveling at speeds under 10 km/h (6.0 mi/h),
“_ _” will be displayed.
Average fuel consumption mode
This display shows the average fuel consump-
tion since it was last reset.
When the average fuel consumption mode is se-
lected, the display flashes for five seconds, and
then “AV _ _ MPG” (average distance that can
be traveled using 1.0 Imp.gal of fuel) is dis-
played.
NOTE:
1.
• To reset the average fuel consumption display,
push the “RESET” button to select the mode
again, and then push the “RESET” button for 1
second while the display is flashing.
• After resetting the average fuel consumption
display, “_ _” will be shown for that display until
the vehicle has traveled 1 km (0.6 mi).
CAUTION:
EC3P61041
If there is a malfunction, “– –” will be dis-
played. Replace the meter assembly.
Self-diagnosis device
This model is equipped with a self-diagnosis de-
vice for various electrical circuits.
If any of those circuits are defective, the multi-
function display will indicate a two-digit fault
code (e.g., 11, 12, 13).
If the multi-function display indicates such an
fault code, note the code number, and check the
vehicle.
Refer to “FUEL INJECTION SYSTEM” on page
8-41.
CAUTION:
EC3P61042
If the multi-function display indicates an fault
code, the vehicle should be checked as soon
as possible in order to avoid engine damage.
This model is also equipped with a self-diagno-
sis device for the immobilizer system.
If any of the immobilizer system circuits are de-
fective, the immobilizer system indicator light will
flash, and then the multi-function display will in-
dicate a two-digit fault code (e.g., 51, 52, 53)
when the key is turned to “ON”.
1. Instantaneous fuel consumption mode
1. Average fuel consumption
1. Fault code display
2. Immobilizer system indicator light
Manuals by Motomatrix / www.motomatrix.co.uk / The Solution For Lost Motorcycle Coded Keys
email: [email protected]
