Yamaha Fazer FZ8-SA, Service Manual

Page: 113 / 610

CABLE ROUTING
2-64
1. Frame
2. Fuel tank cover
3. Fuel tank breather hose
4. Fuel tank drain hose
5. Fuel tank
6. Fuel pump
7. Clip
8. Fuel hose
9. Fuel hose connector cover
A. Install the fuel tank drain hose with the
white paint marks facing to the left of the
vehicle.
B. For the knob of the clip, any direction is
acceptable. The clip should not be run onto
the spool.
C. Install the fuel tank breather hose with the
yellow paint marks facing to the left of the
vehicle.
D. Pass the fuel tank drain hose through the
fuel tank bracket clamp. There should be
no bend of the hose between the fuel tank
nipple and clamp.
E. Fit the black double lock side to the engine
side.
F. Fuel pump side
G. Insert the connector until the click sound is
heard and check that the connector does
not come off. Make sure that no foreign
matter is caught in the sealing section. (It is
prohibited to wear the cotton work gloves
or equivalent coverings.)
H. After item “G” mentioned above is finished,
check that the fuel hose connector cover is
inserted from the down side “a”, “b” and “c”
sections are perfectly equipped.
I. This part works as a dropout stopper
J. Fuel injector side
K. After Step “G” as above is finished, check
that the connector is completely attached
by sliding the double lock (black part) “d”
on the connector as shown in the illustra-
tion and seeing if it touches firmly or not.