Lower unit
8-69
LOWR
13. Check that the forward gear backlash
average is within specification.
TIP:
Adjust the shim thicknesses if the forward
gear backlash is out of specification.
14. Remove the special service tools, and
then install the oil seal housing assembly,
shift rod assembly, and water pump
assembly. See “Installing the water
pump” (8-61).
Shimming
9
Make sure to select the pinion shim(s) (T3)
before selecting the forward gear shim(s)
(T1).
9
When assembling the lower unit to mea-
sure the backlash after selecting the pinion
shim(s), do not apply gear oil, grease, or
sealant to the parts.
9
When assembling the lower unit after shim-
ming is completed, make sure to apply gear
oil, grease, and sealant to the specified
areas.
Forward gear backlash:
0.12–0.45 mm (0.005–0.018 in)
Summary of Contents for F50D
