Oriental motor AlphaStep AR Series, Operating Manual

Page: 1 / 8

1
Operating Manuals for the
AR
Series
Manual name
Motor
function
Driver
function
Installing
the motor
Installing
the driver Connection
Operation Troubleshooting
AR
Series Motor OPERATING MANUAL
(Supplied with motor)
○ − ○ − − − −
AR
Series DC power input
Pulse input type Driver
OPERATING MANUAL (this document)
− ○ − ○ ○ − −
AR Series DC power input
Pulse input type USER MANUAL
○ ○ ○ ○ ○ ○ ○
The "USER MANUAL" does not come with the product. For details, contact your nearest Oriental Motor sales office or download
from Oriental Motor website download page.
HM-40093-3
O P E R AT I N G M A N U A L
Closed loop stepping motor and driver package
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures
and safety precautions.
y
Please read it thoroughly to ensure safe operation.
y
Always keep the manual where it is readily available.
AR
Series
DC power input Pulse input type Driver
Introduction
„
Before use
Only qualified personnel should work with the product.
Use the product correctly after thoroughly reading the section
"Safety precautions.”
The product described in this manual has been designed and
manufactured for use in general industrial equipment. Do
not use for any other purpose. Oriental Motor Co., Ltd. is not
responsible for any damage caused through failure to observe
this warning.
„
Hazardous substances
The products do not contain the substances exceeding the
restriction values of RoHS Directive (2011/65/EU).
„
Checking the product
Verify that the items listed below are included. Report any
missing or damaged items to the branch or sales office from
which you purchased the product.
y
Driver ........................................................................1 unit
y
CN1 connector (3 pins) ............................................1 pc.
y
CN5 connector (36 pins) ..........................................1 pc.
y
OPERATING MANUAL Driver (this document) ........1 copy
Names of parts
Current setting switch
Speed filter setting switch
Control mode select
switch (SW1-No.2)
Resolution switches
(SW1-No.3/No.4)
Pulse input mode select
switch (SW1-No.1)
Data edit connector
(CN4)
Motor connector
(CN2)
POWER LED
ALARM LED
I/O signals connector
(CN5)
Main power supply
input terminals (CN1)
Frame Ground
Terminal (CN1)
DIN lever