Yamaha EGO GEAR Owner'S Manual Download Page 29

Page: 29 / 86

5-8

Instrument and control functions

EAU12902

Front brake lever

The front brake lever is located on the
right side of the handlebar. To apply
the front brake, pull this lever toward
the throttle grip.

EAU12952

Rear brake lever

The rear brake lever is located on the
left side of the handlebar. To apply the
rear brake, pull this lever toward the
handlebar grip.

EAUN0440

Rear brake lever lock

This vehicle is equipped with a rear
brake lever lock.

To lock the brake lever

1. Pull the rear brake lever toward

the handlebar grip.

2. Push the lever lock pin down until

it latches with the lever lock pin
stopper.

To unlock the brake lever

1. Pull the brake lever toward the

handlebar grip.

1. Front brake lever

1. Rear brake lever

1. Rear brake lever
2. Lever lock pin
3. Lever lock pin stopper

2. The lever lock pin should release

from the lever lock pin stopper
and unlock the rear brake lever.

Summary of Contents for EGO GEAR























































































Search results

Summary of Contents for EGO GEAR

Reviews:

Related manuals for EGO GEAR

Brands by name

Popular brands

Yamaha EGO GEAR, Owner'S Manual

Search results

Summary of Contents for EGO GEAR

Reviews:

Related manuals for EGO GEAR

Brands by name

Popular brands