8-31
8
Periodic maintenance and adjustment
Replacing a turn signal light
bulb or auxiliary light bulb
If a turn signal light bulb or auxiliary
light bulb does not come on, follow
the prcedures as follow.
Replacing a front turn signal
light bulb
1. Place the vehicle on the centerstand.
2. Remove panel A and B (see page
8-9)
3. Remove the turn signal light bulb
socket (together with the bulb) by
turning it counterclockwise.
EAU62850
Headlight
This model is equipped with an LED-
type headlight.
If a headlight does not come on, have
a Yamaha dealer check its electrical
circuit.
NOTICE
ECA16581
Do not affix any type of tinted film or
stickers to the headlight lens.
1. Turn signal light bulb socket
4. Remove the burnt-out bulb by
pulling it out.
5. Insert a new bulb into the socket.
NOTICE
ECAU0081
If a turn signal light bulb of different
wattage than recommended is used,
the turn signal light flashing may be
affected.
6. Install the socket (together with
the bulb) by turning it clockwise.
7. Install the panel.
Replacing an auxiliary light
bulb
1. Remove panel A and B. (See page
8-9.)
2. Remove the auxiliary light socket
(together with the bulb) by pulling
it out.
1. Auxiliary light bulb socket
