Yamaha DVR-700 Service Manual Download Page 43

Page: 43 / 122

DVR-700/NS-PSW700/NS-P700

VR-70

NS-PSW70

0/NS-P70

Forward

Reverse

Forward

Reverse

Sub-menu selection

Main menu selection

●

Canceling Self-Diagnostic Function

1. Before canceling self-diagnostic function, execute setting for FACTORY PRESET of main menu No. 18 (Memory

initialization inhibited or Memory initialized).

In order to keep the user memory stored, be sure to select INIT INHI (Memory initialization inhibited).

2. Press the “STANDBY/ON” key of this unit to turn off the power.

●

Operation procedure of Main menu and Sub-menu

There are 22 menu items, each having sub-menu items.

Main menu selection

Select the main menu using “

▲

(up) ” (Forward) key and “

▼

(down) ” (Reverse) key on the remote control.

Sub-menu selection

Select the sub-menu using “

▶

(right) ” (Forward) key and “

◀

(left) ” (Reverse) key on the remote control.

●

Functions in Self-Diagnostic Function mode

In addition to the self-diagnostic function menu items, functions as listed below are available.

• [DVD/USB]

: Signal input DVD/USB is selected.

• [INPUT1]

: Signal input OPTICAL1 is selected.

• [INPUT2]

: Signal input OPTICAL2 is selected.

• [INPUT3]

: Signal input COAXIAL is selected.

• [INPUT4]

: Signal input ANALOG is selected.

• [TUNER]

: Signal input FM tuner is selected.

• [DOCK]

: Signal input DOCK is selected.

• [STANDBY/ON] : The self-diagnostic function mode is canceled and the stand-by mode starts.

Summary of Contents for DVR-700



























































































































Search results

Summary of Contents for DVR-700

Reviews:

Related manuals for DVR-700

Brands by name

Popular brands

Yamaha DVR-700, Service Manual

Search results

Summary of Contents for DVR-700

Reviews:

Related manuals for DVR-700

Brands by name

Popular brands