21
DVR-700/NS-PSW700/NS-P700
D
VR-70
0/
NS-PSW70
0/NS-P70
0
Metalblade
Cabinet ass'y
Flatblade screwdriver
Side grille ass'y
Dowels
Driver woofer
Connectors
1
■
NS-PSW700 DISASSEMBLY PROCEDURES
(Remove parts in the order as numbered.)
Disconnect the power cable from the AC outlet.
1. Removal of Side Grille Ass’y
* The side grille ass’y is fixed to the NS-PSW700
cabinet ass’y with dowels at 7 locations. As a
flatblade screwdriver is used for removal, use special
care not to cause damage to the NS-PSW700
cabinet ass’y.
a. First, insert a flatblade screwdriver at 3 dowel positions
and push up the side grille ass’y. (Fig. 1)
b. Next, using the metalblade or the like, push the side
grille ass’y upward until it comes off. (Fig. 1)
Fig. 2
Fig. 1
Note:
• Removing the side grille ass’y with the flatblade
screwdriver only without using the metalblade or
the like may cause damage to the side grille ass’y.
• When installing the side grille ass’y, apply quick-
drying bond or the like to dowels and then fit them
into dowel holes for secure installation.
(The side grille ass’y will come off easily if its
dowels are fitted into dowel holes without applying
quick-drying bond or the like.)
2. Removal of Driver Woofer
a. Remove 4 screws (
). (Fig. 2)
b. Pull out the driver woofer.
c. Disconnect the connector connected to the terminal
of the driver woofer. (Fig. 2)
d. Remove the driver woofer. (Fig. 2)
