Yamaha DVR-700 Service Manual Download Page 24

Page: 24 / 122

DVR-700/NS-PSW700/NS-P700

VR-70

NS-PSW70

0/NS-P70

Pin No.2 RxD

Pin No.3 TxD

Pin No.5 GND

Pin No.7 RTS

Pin No.8 CTS

When replacing the following parts, be sure to write the latest firmware.

Replaced parts

Write the latest firmware to

Main

Microprocessor

DSP

Sub-

Microprocessor

Module Board

MAIN P.C.B.

(NS-PSW700)

yes

IC500 (Main microprocessor) of MAIN P.C.B.

(NS-PSW700)

yes

IC303 (DSP (TI) flash ROM) of MAIN P.C.B.

(NS-PSW700)

yes

FRONT P.C.B.

(DVR-700)

yes

IC303 (Sub-microprocessor) of FRONT P.C.B.

(DVR-700)

yes

DVD module P.C.B.

(DVR-700)

yes

■

UPDATING FIRMWARE

●

Required

tools

• Windows 98/2000/Me/XP, PC with a serial port (RS232C)

• Firmware downloader program

DSP_FLASHER_v3.0.exe : for main microprocessor
DSP_FLASHER_v2.7.exe : for DSP (TI FLASH ROM)
FlashSta.exe

: for sub-microprocessor

• Firmware

D700_xxxxx.mot

: for main microprocessor

DVX700_data1_verx_xx.hex : for DSP (TI FLASH ROM)
D700S_xxxx.mot : for sub-microprocessor
S8CAxxxx.BIN

: for module board

• RS232C cross cable “D-sub 9 pin female”

(Specifications)

• RS232C conversion adaptor (Part No.: WR492800)

●

Preparation

1. For writing to the main microprocessor, DSP and sub-microprocessor:

Download firmware upgrading program and firmware from the specified source to the same folder of the PC.

2. For writing to the module board:

Make the Firmware CD by writing the firmware of module board into the root folder of the CD-R.
Set the CD volume label to “PIONEER”.

●

Precautions

• While writing firmware, keep the other application software on the PC closed.

It is also recommended to keep the software on the task tray closed as well.

• Do not turn off the power while writing firmware.

●

Confirmation of firmware version and checksum

Before and after writing firmware, check the firmware version and checksum by using the self-diagnostic function
menu.

1. Start up the self-diagnostic function and select “11. CPU INFORMATION” menu.

2. Have the firmware version and checksum displayed by using sub-menu.

For more information, refer to “SELF-DIAGNOSTIC FUNCTION”.

Summary of Contents for DVR-700



























































































































Search results

Summary of Contents for DVR-700

Reviews:

Related manuals for DVR-700

Brands by name

Popular brands

Yamaha DVR-700, Service Manual

Search results

Summary of Contents for DVR-700

Reviews:

Related manuals for DVR-700

Brands by name

Popular brands