Yamaha DTXPRESS III, Owner'S Manual

Page: 36 / 216

36
UT SEQ SETUP
Count Switch=off q
5-3. Sync Mode
This function synchronizes the DTXPRESS III sequencer’s clock
with the clock of an external device.
5. SEQ (Sequencer) Group
This sub-mode contains settings that relate to the sequencer (song).
This group is divided into the following 4 pages.
5-1. MIDI Control .................................................... 36
5-2. Count Switch ................................................... 36
5-3. Sync Mode ...................................................... 36
5-4. Use Tempo ...................................................... 36
5-1. MIDI Control
This enables or disables the DTXPRESS III to transmit or receive
system real-time messages (start/continue/stop).
When this function is enabled, you can control an external se-
quencer or rhythm machine from the DTXPRESS III. Control of
the DTXPRESS III from an external sequencer or rhythm machine
is also possible.
q
MIDI Control
on
: Transmits and receives the following system real-time mes-
sages.
• Transmits timing clock (F8) (transmit only)
• Transmits and receives start, stop, and continue
(FA, FB, FC)
off
: Does not transmit or receive system real-time messages.
5-2. Count Switch
This function turns the 2 bar countdown before the song starts
playback, on or off.
Utility Mode
UT SEQ SETUP
MIDI Control=off q
q
Count Switch
on
: After a 2 bar countdown, the song will start playback.
off
: No countdown, the song will start playback immediately.
UT SEQ SETUP
Sync Mode= auto q
UT SEQ SETUP
Use Tempo= song q
q
Use Tempo
song
: Changes the tempo of the song to its default tempo when
the song is switched.
global
: The tempo remains unchanged at the currently set tempo
when the song is switched.
q
Sync Mode
int
: Movement is determined by the DTXPRESS III’s internal
clock.
ext
: Movement is determined by the clock of an external device
received via the MIDI IN/TO HOST jacks.
auto
: If a timing clock (F8) is received via the MIDI IN/TO HOST
jack the external clock will be used If a timing clock (F8) is
not received the internal clock will be used.
5-4. Use Tempo
This function sets the tempo of a song to either change each time
to its default tempo, or remain unchanged at the currently set tempo
when the song is switched.