Introduction
Preparations
Basic Operation
Advanced
Operation
Additional
Information
Appendix
58
DSP Parameter
You can enjoy good quality sound with the preset parameters. Although you do not have to change the initial settings, you can change some
of the parameters to better suit the input source or your listening room.
Changing Parameter Settings
1
1
Set
PARAMETER/SET MENU
to
PARAMETER
on the remote control.
2
2
Turn on your video monitor and press
ON SCREEN
to select the full display.
3
3
Select the sound field program you want to adjust.
4
4
Press
g
or
h
to select the parameter.
5
5
Press
+
or
–
to change the parameter value.
When you set the parameter to a value other than the factory preset value, an
asterisk mark appears by the parameter name on the monitor screen.
6
6
Repeat steps 3 through 5 above as necessary to change other program
parameters.
Parameter Descriptions
You can adjust the values of certain digital sound field parameters so the sound fields are recreated accurately in your listening room. Not all
of the following parameters are found in every program.
INIT. DLY (Initial Delay)
[P. INT. DLY
for the presence sound field
]
Control Range 1 – 99 msec
Function .............. This parameter changes the apparent distance from the source sound by adjusting the delay between the direct sound
and the first reflection heard by the listener.
Description ......... The smaller the value, the closer the sound source seems to the listener. The larger the value, the farther the apparent
distance seems. For a small room, this parameter would be set to a small value, and for a large room, it would be set to
a large value.
P05
ROCK CONCERT
Roxy Theatre
≥ INIT.DLY…………15ms
LIVENESS…………………5
REV.TIME…………1.6s
REV.DELAY……100ms
REV.LEVEL……………7%
Program No.
Program Name
Program Type (subprogram)
Cursor
Parameters
Example using the ROCK CONCERT program
Level
Level
Time
Time
Time
INIT.DLY
INIT.DLY
INIT.DLY
Sound Source
Reflection Face
Small value = 1 ms
Large value = 99 ms
Sound Source
Early
Reflections
Level
