Yamaha DPX-830 - WXGA DLP Projector Page 26 Owner'S Manual Download

Page: 26 / 46

How to set the menus

Following describe how to set AUTO POWER OFF time as an
example.

1. Press the MENU button.

• If no signal is input, the menu does not appear.

2. Press the

button to select a menu to use.

• SETUP menu is selected in this example.

3. Press the ENTER button (or

button).

4. Press the

button to select an item to adjust.

5. Set the selected item by pressing the

button.

To exit from the menu:

6. Press the MENU button several times.

Important

• If the MENU button does not function, unplug the

power cable from the wall outlet. Wait about 10
minutes, plug the power cable in, and try again.

SATURATION

Unavailable when the input source is HDMI or D-SUB source is an RGB signal.

HUE

Available only when the VIDEO or S-VIDEO source is NTSC or 4.43NTSC signal.

SHARPNESS

Unavailable when the D-SUB or HDMI source is a computer signal.

PROGRESSIVE MODE

Available only when the input signal is TV50, TV60, 480i or 576i.

COLOR SYSTEM

Available only when the input source is VIDEO or S-VIDEO.

SET UP LEVEL

Unavailable when the input source is HDMI, and also when the D-SUB source is a computer signal.

SCART INPUT

Available only when the input source is D-SUB.

HORIZ. POSITION

Unavailable when the input source is HDMI.

VERT. POSITION

Unavailable when the input source is HDMI.

PHASE

Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.

TRACKING

Available only when the D-SUB source is a computer signal.

OVER SCAN

Unavailable when the VIDEO or S-VIDEO source is NTSC, 4.43NTSC, PAL-M, PAL-60 signal.

D-SUB INPUT

Available only when the input source is D-SUB except RGBCs (576i) signal.

SYNC NOISE MASK

Available when the input source is COMPONENT 720p, 1080i signal and D-SUB 720p, 1080i computer
signal.

CLAMP POSITION

Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.

CLAMP WIDTH

Available when the input source is COMPONENT and D-SUB, except RGBCs (576i) signal.

LPF

Available only when the COMPONENT or D-SUB source is a 480i/p, 576i/p signal, except RGBCs (576i)
signal.

IMAGE

TV60

SETUP

TV60

SETUP

16:9

CINEMA

OFF

SCREEN ASPECT

VERTICAL
LOCATION

LAMP MODE

AUTO POWER
ON

AUTO POWER
OFF

TV60

OFF

AUTO POWER ON

AUTO POWER
OFF

SPLASH
SCREEN

OFF

30 min

AUTO POWER
ON

AUTO POWER
OFF

SPLASH
SCREEN

Summary of Contents for DPX-830 - WXGA DLP Projector















































Search results

Summary of Contents for DPX-830 - WXGA DLP Projector

Reviews:

Related manuals for DPX-830 - WXGA DLP Projector

Brands by name

Popular brands

Yamaha DPX-830 - WXGA DLP Projector, Owner'S Manual

Search results

Summary of Contents for DPX-830 - WXGA DLP Projector

Reviews:

Related manuals for DPX-830 - WXGA DLP Projector

Brands by name

Popular brands