38
This projector has two indicators, each of which shows the operation condition of the projector.
Refer to Troubleshooting for additional indication signals.
◆
Normal conditions
◆
Abnormal conditions
*1: When LAMP MODE of the SETUP menu is set to CINEMA.
*2: When LAMP MODE is set to STANDARD, this duration will be decreased to 2000 hours.
POWER
STATUS
CONDITION
NOTE
Steady red
Off
Stand-by.
Steady green
Blinking green
Warming up period (about 1 minute).
The STANDBY/ON button cannot be used
until the STATUS indicator is steady green.
Steady green
Steady green
The projector is ready.
Steady red
Blinking green
Cooling down period (lasts under 2 minutes; normal when
shutting down).
Do not unplug the projector until the
STATUS indicator is off.
POWER
STATUS
CONDITION
SOLUTION
Steady green
or
Steady red
Blinking orange
Abnormal temperature
• The ventilation grilles are clogged with dust or dirt.
• The room temperature is high.
• Clean the ventilation grilles.
• Relocate the projector to a cooler place.
• Remove any objects blocking the
ventilation grilles.
Steady red
Blinking green
Abnormal when it occurs except while shutting down. The
protection circuit is working or the lamp is in an abnormal
condition.
• Wait until the STATUS indicator goes out,
then press the STANDBY/ON button.
• If the above solution is not effective,
replace the lamp.
Steady green
Blinking green/red
Lamp operation time warning. (Total lamp operation time
reached 2250 hours
*1
while the power was on.)
Replace the lamp.
Change with a new lamp if this problem
recurs.
Steady red
Blinking red
Lamp operation time warning. (Total lamp operation time
reached 2250 hours
*1
while the power was off.)
Steady red
Steady red
Lamp operation time warning. (Total lamp operation time
reached 3000 hours
*1, *2
while the power was off.)
Blinking
green/red
Off
The lamp cover isn’t closed.
Close the cover correctly.
Blinking
green/red
Steady or Blinking
Abnormal.
Contact your dealer.
STATUS indicator
POWER indicator
STANDBY/ON button
Indicators
14
