Yamaha Disklavier Advanced Operation Manual Download Page 67

Page: 67 / 121

Prg

The import file is played by the

piano on the channel with the

smallest number containing a

piano group voice.

Prg(all)

All channels that contain a

piano group voice in the

import file is played by the

piano.

Press [PLAY] to play back the song
disk.

Synchronization Using
the MTC

MTC Synchronization
Settings

In order to achieve synchronization using the

MTC (MIDI time code), the settings for sending

and receiving the MTC are performed.

This Disklavier has a function that uses the MIDI

time code (MTC) to synchronize with an external

component.

This Disklavier can function either as the Master

or as the Slave when synchronization is to be

achieved using the MTC. Set the MTC-related

parameters in order to use the synchronization

function.

Press [FUNC.].

The FUNC. indicator lights and the

Function menu appears.

Press [

] until the

cursor is next

to the MIDI setup option, then
press [ENTER].

The following display appears.

Press [

] until the

cursor is next

to the MTC, then press [ENTER].

The following display appears.

Summary of Contents for Disklavier


























































































































Search results

Summary of Contents for Disklavier

Reviews:

Related manuals for Disklavier

Brands by name

Popular brands

Yamaha Disklavier, Advanced Operation Manual

Search results

Summary of Contents for Disklavier

Reviews:

Related manuals for Disklavier

Brands by name

Popular brands