Yamaha Disklavier, Advanced Operation Manual

Page: 22 / 121

17
English Chapter 4: Formatting & Titling Disks
Chapter 4
Formatting & Titling Disks
This chapter describes how to format and title disks. New floppy disks must be formatted before you can
use them to record songs with the Disklavier. Memory Disks are pre-formatted, but you may want to re-
format them when you want to erase all data on them at once. Titling disks enables you to manage disk
contents easily.
Formatting Disks
Note:
Formatting a disk erases all the data
previously stored on the disk, so always make
sure the disk you are going to format does not
contain songs you want to keep.
1
Press the [SELECT] buttons and
specify the disk to format.
Note:
If you are formatting a floppy disk,
make sure that the floppy disk’s erasure
protection tab is set to “unprotected”.
If the disk has not been formatted, the
following display appears.
If the disk contains songs, it might be worth
checking them to see if there are any you
want to keep.
2
Press [FUNC.].
The FUNC. indicator lights and the
Function menu appears.
3
With the
c
cursor next to the Disk
option, press [ENTER].
The Disk menu appears.
4
With the
c
cursor next to the
Format option, press [ENTER].
The following display appears.
5
Use the [–/NO] and [+/YES] to
select a disk type: SMF Type Disk
or E-SEQ Type Disk. Then press
[ENTER].
SMF type disk is recommended if you are
not going to be using this disk with other
Disklavier models. For more information
on disk types, see “Disk Types” on page 51.
A display similar to the following appears.