CVP-609/605 Owner’s Manual
97
CVP
-60
9 A
ssem
bl
y
3
Fix unit B to the speaker box of unit A using two short
screws (5 x 18 mm).
If the screw holes do not align, loosen the other screws and
adjust the position of unit B.
4
Fasten unit C to unit A in the same way.
3
Attach unit E to unit D.
Fix unit E to unit D using two short screws (5 x 18 mm).
4
Attach unit D to unit A.
1
Fix unit D to the bottom surface of unit A using two short
screws (5 x 18 mm).
2
Fix unit D to the speaker box of unit A using two short
screws (5 x 18 mm).
If the screw holes do not align, loosen the other screws and
adjust the position of unit D.
5
Raise unit A into the upright position.
CAUTION
• Be careful not to pinch your fingers.
• When you raise the unit, do not hold the key cover.
6
Install unit F.
1
Remove the cover from unit D.
2
Untie and straighten out the bundled cord.
3
Pass the pedal cord from under unit D to the backside of
the main unit.
4
Place unit F on the bracket of unit D.
5
Attach unit F to unit D using three thin screws (4 x 20 mm).
7
Connect the pedal cord.
Washers
1
2
3
4
1
Insert the pedal cord plug into the
pedal connector.
Insert the plug into the connector
so that the side with the arrow
mark is facing forward (keyboard
side). If the plug does not fit easily
do not try to force it, but check the
plug for correct orientation, and
then reinsert it into the connector.
Insert the pedal cord securely
until the metal part of the cord
plug disappears from view.
Otherwise, the pedal may not
function properly.
Summary of Contents for Clavinova CVP-605
Page 115: ...CVP 609 605 Owner s Manual 115 ...
