Assembling the Clavinova
131
CLP-785, CLP-775, CLP-745, CLP-735, CLP-795GP, CLP-765GP Owner’s Manual
1.
Lean the unit against the wall as
shown below.
CAUTION
Be careful not to pinch your fingers.
1-1.
Spread a large soft cloth, such as a blanket,
as shown to protect the floor and wall
surfaces.
1-2.
Lean the main unit against the wall with
the key cover closed and the keyboard side
on the bottom.
2.
Attach two front legs and a rear leg.
Refer to the diagram below to verify the
orientation of the legs.
2-1.
Install and tighten four screws on each leg,
starting with one of the front legs.
3.
Install the pedal box.
3-1.
Remove the twist tie that affixes the pedal
cord to the upper portion of the pedal box.
Be s
u
re to position the
key
b
oard side on the
b
ottom.
Incorrect
NOTICE
Do not place the main
u
nit as sho
w
n in the ill
u
stration here.
Incorrect
Incorrect
Rear leg
Front leg
Front leg
6 × 40 mm fixing scre
w
s
T
w
ist tie
Tape
