2
Getting Ready
Music Stand
CLP-811
To raise the stand:
1. Using two hands, take hold of the left and right sides
of the music stand. Lift the stand upwards while at
the same time rotating the top of the stand toward
you.
2. Push the stand down into place so that the opening
on the base of the stand fits onto the small notch on
the plastic hook.
To retract the stand:
Lift the stand straight up off the notch, then rotate it
backwards and return it to its original position.
CLP-611
To raise the stand:
1. Lift the stand forward as far as it will go.
2. Flip down the two metal supports at the bottom rear
of the stand.
3. Lower the stand downward slightly so that it comes
to rest on the metal supports.
To lower the stand:
1. Lean the stand forward as far as it will go.
2. Raise the two metal supports (at the back of the
stand) so that they are flush with the stand.
3. Gently lower the stand backward until it is all the
way down.
NOTE
Please do not try to use the stand in half-raised
position. When raising or lowering the stand, always
hold on to it until it is securely in place.
Key Cover
To open the cover:
1. Lift the cover slightly (not too much).
2. Gently slide the cover open.
To close the cover:
1. Slide the cover all the way forward, holding it firmly
so that it can’t drop down.
2. Gently lower the cover over the keys.
Hold the cover with both hands when moving it, and do not release it until it is fully opened
or closed. Be careful to avoid catching fingers (your and others’,) between the cover and the
main unit.
1
2
1
3
2
Be careful of fingers when opening or closing.
CLP-811/611
Getting Ready
