14
CLP-120
17.
Pedal Assembly (Time required: about 3 min)
*
For safety, make sure to perform by two persons.
17-1. Spread soft cloth on the floor and lay down the unit
carefully on its back. (Fig.13)
17-2. Remove the eight (8) screws marked [7]. The pedal
assembly can then be removed. (Fig.15)
[7]
[7]
[7]
[7]
Pedal Assembly
18.
Main Unit (Time required: about 3 min)
*
For safety, make sure to perform by two persons.
*
Previously, spread soft cloth on where the main
unit will be laid.
*
Take care not to catch your fingers between the
main unit and the stand when remove the main
unit.
18-1. Remove the back board. (See Procedure 15)
18-2. Remove the AC cord and the PK cable. (Fig.16)
18-3. Remove the four (4) screws marked [S2]. (Fig.17)
18-4. Slide the main unit backward and lift it to remove.
(Fig.17)
AC INLET
PC
-1
PC
-2
Mac
MID
I
PEDAL
PK Connector Assembly
AC Cord
[S2] x 4
(Fig.15)
[7]:
Bind Head Tapping Screw-1 4.0X14 MFZN2Y
(EP040230)
(Fig.16)
(Fig.17)
[S2]:
Bind Head Screw 6.0X16 MFZN2BL (EG360020)
