11
CLP-120
9.
End Block Assembly L, R
(Time required: about 6 min for each)
9-1.
Remove the top board assembly. (See Procedure 1)
9-2.
Remove the key cover assembly. (See Procedure 5)
9-3.
Remove the panel assembly. (See Procedure 6)
9-4.
Remove the screw marked [45] for each side. The
end block assembly can then be removed. (Fig.8)
10.
HP Jack Assembly (Time required: about 7 min)
10-1. Remove the top board assembly. (See Procedure 1)
10-2. Remove the key cover assembly. (See Procedure 5)
10-3. Remove the panel assembly. (See Procedure 6)
10-4. Remove the end block assembly L (See Procedure 9)
10-5. Remove the three (3) screws marked [40]. The HP
jack assembly can then be removed. (Fig.8)
11.
Power Switch Assembly
(Time required: about 7 min)
11-1. Remove the top board assembly. (See Procedure 1)
11-2. Remove the key cover assembly. (See Procedure 5)
11-3. Remove the panel assembly. (See Procedure 6)
11-4. Remove the end block assembly R (See Procedure 9)
11-5. Remove two (2) screws marked [6]. The PSW
assembly can then be removed. (Fig.8)
End Block Assembly (L)
End Block Assembly (R)
[45a]
[45b]
[40]
HP
[6]
Power Switch Assembly
[3]
(Fig.8)
[3]:
Hexagonal Nut 12.0 14X2 MFZN2BL (VB508600)
[6]:
Bind Head Tapping Screw-1 3.5X10 MFZN2BL (EP030320)
[40]:
Bind Head Tapping Screw-1 3.5X12 MFZN2Y (EP030240)
[45a]:
Truss Head Tapping Screw-1 3.5X30 MFZN2Y (VA076400)
[45b]:
Truss Head Tapping Screw-1 3.5X30 MFZN2Y (VA076400)
